Dinan Pex Cold Air Intake - 2020-2024 G2x/G4x M240i/M340i/M440i - DINAN (D760-0069)
Genuine DINAN Dinan Pex Cold Air Intake - 2020-2024 G2x/G4x M240i/M340i/M440i - Part Number D760-0069
Details
- Product ID:
D760-0069
- Description:
Dinan Pex Cold Air Intake - 2020-2024 G2x/G4x M240i/M340i/M440i. G20/G22/G23/G26/G42
Looking for more, for less? The all new G2x/G4x Mx40i PEX Intake delivers all the performance and sound benefits as its carbon fiber sibling -- just with less showmanship -- resulting in the best dollar-per-horsepower B58 intake system available from Dinan.
The Mx40i's are an impressive lot in terms of performance and style but that is not conveyed when viewing its lackluster stock intake system swaddled by seemingly unfinished strut braces (where applicable). In stock trim, the Mx40i comes with a dry and lifeless air box housing a basic panel filter that is also accompanied by an intake resonator whose job it is to eliminate turbo/intake noises. The same noises that those in the performance world relish. Essentially BMW has seen fit to give Mx40i owners an air box that looks uninspiring, flows adequately but not ideally, and emits no noise. The exact opposite of what the platform exudes otherwise. The Dinan PEX intake for the platform corrects these wrongs and delivers a semi-open intake capable of flowing 58% more air than the stock system resulting in additional top end power and improved throttle response. At the same time revealing an enhanced OEM-like appearance that blends seamlessly with surrounding factory plastic under hood components, and an increase in sound courtesy of the removal of the intake resonator and implementation of a semi-open design.
To achieve the gains in flow that set the Dinan intake system apart, the entire lower box of the system, and not just the lid, has been reworked and enlarged to make use of as much of the available real estate as possible within the engine bay. In turn, this allows a 40% larger, custom, free flowing filter to be housed within and maximum flow to be realized. However, a secondary inlet has always been desired by Dinan in order to effectively fill the volume of the enlarged air box and increased filter surface area. This desire led to a multitude of experiments being conducted on the effectiveness of a possible open-air inlet in the system. With different shapes, locations, and sizes of openings being tested, the goal was to ensure that the added secondary inlet did not cause any unwarranted side effects such as an increase in air temps in the system. This is commonplace with open-air intake systems where overheated engine bay air is employed in the intake tract. The results of these tests showed that the patterned openings present in the final iteration of the box located on the opposite side from the engine provided a perfect balance of additional volume to assist the factory inlet all the while not causing an increase in turbo inlet temperatures. This was the case regardless of testing conditions (single/multiple gear pulls, constant speed, 0-100mph runs, etc.).
With more air being pulled into the system, throttle response is improved and additional power is realized in the form of max gains of +9 WHP / +8 ft-lbs of torque. The secondary air inlets also allow the intake system to be more audible so the turbo spool and BOV can be appreciated. A stark difference from Dinan's traditional fully sealed systems where induction noise is not nearly as recognizable. While power and sound are the stars, the modest PEX construction fuses effortlessly into the factory engine bay for a reserved visual that despite basic materials still manages to draw attention. It's an economical solution to form and function for a vehicle that permeates both.
Features:
- More Power: Max gains of 9 WHP and 8 lb-ft of torque on a completely stock vehicle
- High heat deflection PEX construction and an OEM look
- Enjoyably louder, sportier sound
- Improved throttle response
- Outflows factory intake by 58% or more
- Larger volume air box (60% larger than stock)
- 40% increase in filter area (stock: 82 in², Dinan: 115 in²) for optimum flow
- Compatible with all G2x Mx40i's with and without factory bracing
- Quick and easy installation
- Condition: New
Also Purchased
Vehicle Fitment
getBMWparts.com
GetBMWparts.com is your #1 online source for BMW Dealership-direct Genuine OEM BMW Parts & Accessories online for over a decade! With competitive pricing on all BMW Parts, Accessories, M Performance and BMW Lifestyle, unparalleled customer service and support, and lightning fast shipping and handling times - we provide your Ultimate Driving Machine the Genuine BMW Parts and Accessories it deserves.
DINAN
At Dinan, their passion for BMWs is evident in their dedication to designing and producing the most innovative and performance driven BMW products on the market. Serious enthusiasts turn to Dinan because they appreciate their ability to make BMW performance upgrades that outperform the rest of the BMW aftermarket industry. When customers want performance they turn to Dinan first: if there is a specific BMW upgrade that you have in mind, chances are they can do it. GetBMWparts.com proudly offers the entire Dinan Performance Parts lineup including high performance exhaust systems, cold air intakes, Dinantronics tuners, Diantronics Sport tuners, suspension systems, intercoolers, lowering springs, wheels, and more! While we are required to display Dinan's MSRP pricing on our site due to MAP policies, please Contact Us for a super competitive quote - we'll match (and do our best to beat) any other vendor's pricing on Dinan Performance Parts! Most Dinan parts purchased from getBMWparts.com receive complementary (FREE!) ground shipping within the US! We'll also ship Dinan parts outside the US at competitive shipping rates! Dinan parts are not Genuine BMW Parts and carry their own Dinan warranty - please visit www.dinancars.com for warranty policy, product fitment guides, specs and additional information.